Ph: 1300 88 75 76 - RTO ID 91528

Safe Load Program NSW: What It Is and Why It Matters

Safe Load Program NSW: What It Is and Why It Matters NSW transport safety training

Fuel tanker drivers in NSW need more than a dangerous goods licence to load bulk fuel at a terminal. The Safe Load Program (SLP) is the industry credential that covers safety when entering fuel terminals — and it allows the holder to enter fuel terminals and other fuel storage facilities in Australia. If you load bulk petroleum product for a living, you cannot work without it.

There is also a strict entry requirement: you must first hold a current Dangerous Goods driver licence before you can sit for SLP. This guide explains what the Safe Load Program is, who needs it, what it covers, and how to get your SLP card in NSW.

Quick Summary

  • The Safe Load Program (SLP) covers safety when entering fuel terminals — it allows the holder to enter fuel terminals and other fuel storage facilities in Australia
  • You must first hold a current Dangerous Goods driver licence (TLILIC0001) before you can sit for SLP
  • The SLP course at Kells Safety Centre costs $385 plus a $200 card fee payable directly to SLP Administration
  • Training runs for four hours, face-to-face, at Wetherill Park (Wollongong when bundled with the DG licence course)
  • SLP is for drivers who load bulk petroleum product at terminals, depots and fuel storage facilities

What Is the Safe Load Program?

The Safe Load Program (SLP) is an industry training program that covers safety when entering fuel terminals. It provides introductory training for drivers entering oil industry terminals and depots, and it is intended to ensure the safety of personnel and the protection of facilities at oil industry inland storage and distribution facilities throughout Australia.

Completing the program and holding a current SLP card is what allows a driver to enter fuel terminals and other fuel storage facilities in Australia. Terminals and depots treat the SLP card as a prerequisite for anyone needing to enter a petroleum facility to load bulk petroleum product.

SLP is not a general load restraint course, and it is not a replacement for dangerous goods training. Load restraint principles are covered as part of the program — because loading a petroleum tanker safely is a restraint job — but the purpose of SLP is terminal safety and terminal access for the fuel industry.

Who Needs the Safe Load Program?

The SLP is relevant to drivers whose work takes them into fuel industry facilities:

  • Fuel tanker drivers — anyone who loads bulk petroleum product at a terminal or depot needs a current SLP card before they can enter
  • Petroleum transport operators — fuel companies and terminal operators require SLP as part of site entry conditions
  • Drivers moving into fuel work — existing heavy vehicle drivers upgrading to petroleum transport
  • Fleet managers — responsible for ensuring every driver who enters a terminal holds the required credentials

If your employer or the terminal you load at has told you to get an SLP card, that is not a suggestion — it is the facility’s entry requirement.

You Must Hold a DG Licence Before You Can Sit SLP

The Safe Load Program has a hard prerequisite: you must have a current Dangerous Goods driver licence (TLILIC0001) to be able to complete the SLP training session. The SLP builds on dangerous goods knowledge — product properties, tanker loading, emergency awareness — so the DG licence comes first.

The DG licence is issued by the NSW EPA and is required for drivers carrying dangerous goods in bulk — a receptacle with a capacity of more than 500 litres or containing more than 500 kilograms. The licence is valid for five years. Kells Safety Centre delivers the two-day TLILIC0001 course at Wetherill Park and Wollongong — see our DG licence course page for current fees and dates.

What Does the SLP Course Cover?

The SLP course covers the knowledge and practical skills drivers need to operate safely in petroleum transport and terminal environments. The program modules are:

  • Health and safety — working safely at terminals and depots
  • Product properties — understanding the petroleum products being handled
  • Vehicles loading — safe loading of tankers, load restraint principles and Chain of Responsibility obligations
  • Tanker and gantry knowledge — the equipment drivers work with at the terminal
  • Training and assessment — completing the program and receiving your SLP card

Weight distribution and axle load compliance, safe loading and unloading of petroleum tankers, and petroleum terminal safety are all covered within the course.

Course Cost, Duration and Location

The SLP course at Kells Safety Centre (RTO 91528) runs for four hours, delivered face-to-face at our Wetherill Park training facility in Western Sydney. The course fee is $385 per person, plus a $200 card fee payable directly to SLP Administration.

For drivers coming from the Illawarra or South Coast, SLP is also available at Wollongong when bundled with the Dangerous Goods licence course — our DG and SLP bundle course lets you complete both qualifications in one training period — the four-hour SLP session runs immediately after day one of the DG licence course.

How to Get Your SLP Card

The process is straightforward when you take it in order:

  1. Get your DG licence first. Complete the TLILIC0001 course and obtain your Dangerous Goods driver licence — you must hold it before you can sit SLP
  2. Enrol in the SLP course at Kells Safety Centre
  3. Complete the four-hour face-to-face training — health and safety, product properties, vehicles loading, tanker and gantry knowledge
  4. Complete the assessment as part of the program
  5. Pay the $200 card fee to SLP Administration and receive your SLP card

Once you hold the card, you have the credential that allows you to enter fuel terminals and other fuel storage facilities in Australia. Check your card’s expiry and renewal requirements with SLP Administration when it is issued.

SLP and Your Other Transport Credentials

The SLP sits alongside — not instead of — your other transport qualifications:

  • DG driver licence (TLILIC0001) — the licence to carry bulk dangerous goods; the prerequisite for SLP
  • SLP card — the credential to enter fuel terminals and load bulk petroleum product
  • Blue Card (TLIF0025) — the transport industry work health and safety passport, regulated with Safe Work NSW; different purpose, different training
  • Basic Fatigue Management (TLIF0005) — fatigue management training for BFM accreditation

Key Takeaways:

  • SLP covers safety when entering fuel terminals, and allows the holder to enter fuel terminals and other fuel storage facilities in Australia
  • You must hold a current DG driver licence before you can sit for SLP
  • Course: $385 plus $200 card fee (payable to SLP Administration), four hours, face-to-face
  • Modules: health and safety, product properties, vehicles loading, tanker and gantry knowledge, training and assessment
  • SLP is a terminal-access credential — not a general load restraint course

Frequently Asked Questions

What is the Safe Load Program (SLP)?

The Safe Load Program is an industry training program that covers safety when entering fuel terminals. It provides introductory training for drivers entering oil industry terminals and depots, ensuring the safety of personnel and the protection of facilities, and the SLP card allows the holder to enter fuel terminals and other fuel storage facilities in Australia.

Do I need a DG licence before doing SLP?

Yes. You must have a current Dangerous Goods driver licence (TLILIC0001) before you can sit for the SLP training session. The DG licence is the prerequisite — complete the two-day TLILIC0001 course and obtain your EPA licence first.

What does an SLP card allow me to do?

Holding a current SLP card allows you to enter fuel terminals and other fuel storage facilities in Australia, and to load bulk petroleum product. Fuel terminals treat it as a prerequisite for site entry.

How much does the SLP course cost in NSW?

The SLP course at Kells Safety Centre costs $385 per person, plus a $200 card fee payable directly to SLP Administration. The course runs for four hours, face-to-face.

Is the SLP the same as load restraint training?

No. SLP covers load restraint principles and Chain of Responsibility obligations as part of its vehicles-loading module, but the program’s purpose is safety when entering fuel terminals and gaining the credential to enter fuel storage facilities. It is not a general freight load restraint course.

Where can I do the SLP course in NSW?

Kells Safety Centre delivers the SLP course face-to-face at Wetherill Park in Western Sydney. SLP is also available at Wollongong when bundled with the Dangerous Goods licence course.

Can I do SLP and the DG licence together?

Yes — Kells Safety Centre offers a DG and SLP bundle course that lets you complete both qualifications in one training period, with the four-hour SLP session run immediately after day one of the DG licence course at Wollongong. Remember the SLP requires you to hold your DG licence first.

← Previous ArticleWhat Is the NHVR Fatigue Law? A Guide for NSW Truck DriversNext Article →Basic Fatigue Management Online Course NSW: What Drivers Need to Know
← Back to All Articles